PowerVerter APS INT Series Inverter/Chargerwith Auto-Transfer Switching

• APSINT2012 serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger
  
  
• Supports 230V AC output from a 230V AC line power source or 12V DC battery source
  
  
• 20 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one cycle transfer time
  
  
• 2000 watts continuous AC output in inverter mode
  
  
• Double Boost™ inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see specification chart)
  
  
• OverPower™ inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions. (For best results, utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal DC voltage under load and allow inverter/charger to fully cool before and after OverPower usage.)
  
  
• 3 stage, 15/60 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
  
  
• Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank
  
  
• Protected hardwire output passes 120V line power or inverter output through to connected equipment
  
  
• Reliability enhanced large-transformer design with secure mounting flanges and protected DC wiring terminals
  
  
• Moisture-resistant construction enables vehicular or marine operation in high humidity environments
  
  
• 3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings
  
  
• Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
  
  
• Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 259/264V high voltage auto transfer during overvoltages and selectable 144/163/182/201V AC low voltage auto transfer during brownouts
  
  
• Set of 4 additional configuration dipswitches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger low / high settings
  
  
• Resettable 10A charger AC input breaker and resettable 15A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and temperature related failures
  
  
• Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
  
  
• Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
  
  
• Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory also includes user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged
  
  
• Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
  

• Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion vans and fleet service vehicles; a standalone alternative power source for off-grid, alternative energy or export applications and as an uninterruptible power supply (UPS) for items compatible with a 20 millisecond transfer time.