PTLSOLAR™ 110 Watts Photovoltaic module
TECHNOLOGY
The PTLSOLAR™ PV crystalline solar modules are available in framed and laminate versions. Both modules feature a rugged laminate design. GES/PV uses high efficient crystalline solar cells known for their high efficiency and quality to provide maximum energy production throughout the day. The modules have rated output of 110 Wp & available in both 12 volt and 24 volt version. The efficient design of these modules, with its large surface area, is ideally suited for medium and high power applications. The module is designed for easy interconnection to achieve voltage and current configurations for grid-connected systems as well as stand-alone systems.
Module Design
72 crystalline solar cells form the crux of the module. These full square cells offer a homogeneous appearance, optimal use of the area and are known for high energy yields. Due to its construction of Glass/EVA/Tedlar, the module is light in weight in addition to protecting the module/cells against harsh environmental conditions. A torsion resistant module frame made of anodized aluminum guarantees high mechanical strength, making the module resistant to extreme wind and snow loads. Three bypass diodes integrated into the terminal-cover protect the cells when there is partial shading. Also installation becomes more convenient through the terminal-cover which provides safe handling.
QUALITY
GES/PV has established very high quality standards. Constant checks and inspections guarantee uniformly high quality. Each module which leaves the production line is subjected to thorough visual inspections as well as mechanical and electrical tests.
Certifications
GES/PV/110 module has been type approved as per the requirements of CEI/IEC 61215 standards by JRC, Italy and also conforms to the requirements of Electrical Protection Class II and EWG guideline 89/932 (CE). Besides PTLSOLAR™ has a quality management system that is compliance with the International Quality System Standard ISO 9001.
Options
Modified versions of the module are offered with pre-installed PV-cable and Multi-contact plugs. Also a 24 volt variant of the same module is available.
Electrical data (nominal)
The electrical data apply to stand test conditions(STC):
Radiance at the module level of 100 W/m² with spectrum AM 1.5 and a cell temperature of 25 °C
| Power (MAX) |
P max |
110Wp |
| Configuration |
V |
12 V |
| voltage at max power point |
Vmp |
17.20V |
| Current at Max power point |
Imp |
6.40A |
| Open-circuit voltage |
Voc |
21.20V |
| short circuit current |
Isc |
6.98A |
the rated power may only vary by ± 3% and all other electrical parameters by ± 10 % .
| Dimension and weights |
Module |
laminate |
| dimensions(tolerance ±2mm) |
807 x 1617mm² |
800 x 1610mm² |
| Thickness |
42mm |
4.8mm |
| Overall height including connection box(tolerance ±1mm) |
42mm |
32.5mm |
| Weight |
7.8Kg |
6.1Kg |
Characteristic Data
| Solar Cells per module |
72 |
| Type of Solar Cell |
High efficiency Sun Power Cells(12.5 x 12.5 cm ,Pseudo-square) |
| Connection |
Terminal box with screw terminals |
| Cable Entry |
Prepared for cable glands(M 12) |
| Connection |
4mm Suhner-cable with MC-Connectors |
Cell Temperature coefficients
| Power |
Tk(Pn) |
-0.38%/°C |
| Voltage |
Tk(U ∞) |
-1.9mV/°C |
Limits
| Max .system Voltage |
700Voc |
| Operating Module Temperature |
-40.....+90° C |
| Storm Resistance |
Wind speed of 130Km/h and safety factor of 3 |
|
Contact us 
