PTLSOLAR™ 50 Watts Multi crystalline Photovoltaic module GES/PV/50 photovoltaic module provides excellent value and performance for operation of both DC loads and in an inverter equipped system for AC loads. This module charges 12V batteries efficiently in virtually any climatic conditions. Typical commercial applications of his module, which generates a nominal maximum power of 50 watts, include telecommunications, remote villages, water pumping, small solar generators and home lighting kits. It is also ideally suited for grid-supplemental systems. Module Design 36 full size crystalline solar cells connected in series form the heart of the module. Due to its construction of Glass/EVA/Tedlar, the module is light in weight in addition to protecting the module/cells against harsh environmental conditions. A torsion resistant module frame made of anodized aluminum guarantees high mechanical strength, making the module resistant to extreme wind and snow loads. Installation becomes more convenient through the terminal-cover, which provides safe handling. Quality GES/PV/50 has established very high quality standards. Constant checks and inspections at every step of production guarantee uniformly high quality. Each module which leaves the production line is subjected to thorough visual inspections as well as mechanical and electrical tests. Certifications GES/PV/50 multi crystalline modules have been type approved as per the requirements of CEI/IEC 61215 standards by JRC, Italy and also conforms to the requirements of Electrical Protection Class II and EWG guideline 89/932 (CE). Besides GES/PV/50 has a quality management system that is in compliance with the International Quality System Standard ISO 9002 and Q9002 (1994). Options Modified versions of the module are offered with pre-installed PV-cable and Multi-contact plugs. Also if required, module frame can be provided with additional drain holes for easy outflow of excess rainwater.
Power (MAX) |
P max |
50Wp |
Configuration |
V |
12 V |
voltage at max power point |
Vmp |
16.80V |
Current at Max power point |
Imp |
2.91A |
Open-circuit voltage |
Voc |
21.20V |
short circuit current |
Isc |
3.25 A |
the rated power may only vary by ± 3% and all other electrical parameters by ± 10 % . Dimension and weights
Dimension and weights |
GES/PV/50 |
dimensions(tolerance ±2mm) |
975 x 452mm² |
Thickness |
36mm |
Overall height including connection box (tolerances + 1mm) |
36mm |
Weight |
5.6 Kg |
Characteristic Data
| Solar Cells per module |
36 |
| Connection |
Terminal box with screw terminals |
| Connections (Optional) |
4mm2-Suhner-cable with MC-Connectors |
| Type of Solar Cell |
EFG/Multi-crstalline |
| Cable Entry |
Prepared for cable glands (M 12) |
Cell Temperature coefficients
| Power |
Tk(Pn) |
-0.47%/°C |
| Open-circuit voltage |
Tk(U ∞) |
-0.38%/°C |
| short circuit current |
Tk (Isc) |
-0.10%/°C |
Limits
| Max .system Voltage |
800Voc |
| Operating Module Temperature |
-40.....+90° C |
| Storm Resistance |
Wind speed of 130Km/h and safety factor of 3 |
|